0.5 Inch Small OLED Module-Ocell

OCELL is a 0.5 OLED module designed as a arduino shield and also available for other micro controllers.
It supports SPI (Default setting ) and I2C interface.
You could connect it to Ardunio micro directly without doing any PCB layout by yourself, also you could wire it to any other MCUs like STM series, 51 series, AVR series. It is a good choice for a DIYer to make a interesting stuff by Arduino also is very convenient for a pro engineer to quickly develop and test a project which need a tiny COOL OLED display.
The OLED display brief is below:
These displays are small, only about 0.5" diameter, but very readable due to the high contrast of an OLED display(450cd/m^2 brightness). This display is made of 60x32 individual white OLED pixels, each one is turned on or off by the controller chip. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast; This is the best choice for you to develop a device which needs a micro and striking display.

Screen size: 0.5 (inch) w. H: 15.30X10.20 mm
Color: Monochrome (white)
Brightness: 450 cd/m^2
Response time: 0.01 (ms)
Resolution: 60 * 32
Viewing angle: Full viewing angle (° )
Contrast: 2000: 1
Product type: Pm OLED